The same robot can be sold with a simple dock or with a tower that empties it, washes its mops and refills its water. The difference in price is large, and so is the difference in size. This guide explains what each station does, what is still up to you and which homes each one suits.
In short
- Charging dock: it only charges. You empty the robot’s bin yourself every one or two cleans.
- Auto-empty: the station moves the dust into a bag, usually of 2 to 3 litres, which you change every few weeks.
- All-in-one: it also washes and dries the mops and refills the robot’s water. In exchange, there are water tanks to look after.
- No station does away with maintenance. It spaces it out.
- Before you choose, measure the spot: a large station needs floor space, a socket and clearance above.
The three levels, from least to most
Charging dock
It is a small unit with two contacts. The robot returns to it when it finishes or when the battery runs low, and that is all. The dust stays in the robot’s bin, which usually holds between 250 and 500 ml (as a guide). It needs emptying every one or two cleans, and sooner if you have pets. If the robot mops, the water and the mop pad are also up to you.
In return, it is the cheapest option, it fits in any corner and it adds no noise or consumables. In the catalogue these appear as robots without a station: they come with their charging dock, but no tower.
Auto-empty station
When the robot finishes, the station sucks out the contents of its bin and stores them in a sealed bag. The bag usually holds between 2 and 3 litres and is changed every few weeks, depending on use, the size of your home and whether you have animals. All you do is throw the bag away, with no clouds of dust.
What doesn’t change: the robot’s filter and brushes still need cleaning. And if the robot mops, the water and the mop pad are still up to you. You can see the robots with auto-emptying.
All-in-one station
It adds mop care to auto-emptying. It has one tank for clean water and another for dirty water. When the robot returns, the station washes the mops on a tray, dries them with air (heated or not, depending on the model) and refills the robot’s water tank. Some also dose the detergent.
‘All-in-one’ is not a fixed term: not every station does the same things. Check the product page for four functions, one by one: dust auto-emptying, mop washing, drying and water refilling. You can see the robots with an all-in-one station.
What each one does and what is left to you
| Feature | Charging dock | Auto-empty | All-in-one |
|---|---|---|---|
| What it does by itself | Charges the robot | Charges it and moves the dust into a bag | Charges it, empties the dust, washes and dries the mops and refills the water |
| What is left to you | Emptying the bin; water and mop pad, if it mops | Changing the bag; water and mop pad, if it mops | Changing the bag, emptying the dirty water, filling the clean water and cleaning the tray |
| How often you step in | Every one or two cleans | Every few weeks | Every few days for the water; every few weeks for the bag |
| Space | Minimal | A small tower | The largest of the three |
| Added noise | None | Loud for a few seconds, when emptying | Emptying, plus washing and drying |
| Its own consumables | None | Bags | Bags and detergent |
| Price | The lowest | In between | The highest |
The drawbacks, plainly
Price
The station accounts for a large part of the final price. The same robot can cost a good deal more with an all-in-one tower than with a simple dock. If you will hardly ever mop, that money goes further on better navigation.
Space
An auto-empty station is a tower some 30 to 40 cm tall. An all-in-one is usually around 35–45 cm wide, 40–50 cm deep and 45–60 cm tall. These are rough figures: check the ones on each product page. You also need a hard, level floor, a socket nearby, clear space in front for the robot to get in and out, and clearance above to lift out the tanks. Under a low shelf it won’t work.
Noise
Auto-emptying lasts a few seconds, but it is loud, much like an ordinary vacuum cleaner. Mop washing is quieter. Drying is a gentle hum that can go on for hours, depending on the model. If the station is near a bedroom, use the ‘do not disturb’ schedule that many apps offer so that it doesn’t empty at night.
Consumables
Bags, filters, mop pads and, for all-in-one stations, detergent. Only use detergent the manufacturer approves: an ordinary floor cleaner can foam and damage the station. Before you buy, check that spares for that model are easy to find.
The maintenance that remains
The dirty water has to be emptied every few days: leave it for a week and it smells. The clean tank has to be refilled. The tray where the mops are washed collects mud and hair, and needs a wipe every so often. An all-in-one station doesn’t remove the work: it gathers it in one place and spaces it out.
Which one suits you
- Charging dock, if your flat is small, you have no pets, budget comes first and you don’t mind emptying the bin often.
- Auto-empty, if you have pets, children or a lot of floor, if the dust bothers you when you empty the bin, or if you want to schedule it daily and forget about it. For many homes it is the balance point between price and convenience.
- All-in-one, if almost all your home is hard floor, you want the mopping done without touching dirty mops and you have room for the tower.
There are two cases where moving up a level isn’t worth it. If your home is almost all rugs or fitted carpet, mop washing will hardly be used. And if you have nowhere to put a tower with clear space around it, it will end up in the way.
Tip: choose the spot first
Find a stretch of wall with a socket and a hard, level floor. Measure the width, the depth and the clear height, and compare them with the dimensions on the product page, leaving the margin at the sides and in front that the manual asks for. If the station holds water, avoid standing it on a rug.
Frequently asked questions
How often do I change the bag?
Every few weeks, depending on use. In a small home with no animals it lasts longer; with pets that shed, less. The station or the app usually tells you when it is full.
Can I buy the robot now and the station later?
Only if the manufacturer sells a station compatible with that exact model, and that is not the norm. Bases are not interchangeable between brands or, often, between models. If you think you will want one, it is better to decide now.
Does an all-in-one station smell?
It can if the dirty water sits for several days or the mops don’t dry. Empty and rinse the dirty tank often, clean the washing tray and leave drying switched on.
Next step
In the catalogue you can see the robots by type of station: without a station, with auto-emptying or all-in-one. If you are still deciding on the rest, carry on with how to choose a robot vacuum or with the navigation guide. And if you aren’t sure whether a station will fit in your home, write to us with the measurements of the space.

