Laser, camera or gyroscope: how a robot vacuum finds its way

Two robots with the same power can clean very differently: one works through the house in an orderly way and the other misses half the corridor. The difference is navigation: how the robot knows where it is and what is left to clean. Here are the three systems you will come across, without unnecessary acronyms, and the kind of home each one suits.

In short

  • Gyroscope: cleans in a zigzag without saving a map. It is the cheapest and the lowest, and it is enough for small, simple flats.
  • Camera (vSLAM): builds a map from what it sees. It needs light.
  • Laser: a precise map even in the dark, with rooms, no-go zones and several floors. The robot is taller.
  • LiDAR, LDS and dToF all belong to the same laser family.
  • Dodging cables and socks depends on a separate system, which not every laser robot has.

The three systems, one by one

Navigating means answering three questions: where am I, what have I already cleaned and where do I go next. The answer decides how much floor the robot covers, how long it takes and what you can ask of it from the app.

Gyroscope: order without a map

A gyroscope is a sensor that measures turns. With it, and by counting wheel rotations, the robot works out how far it has travelled and in which direction. This is called inertial navigation: the robot doesn’t see the room, it deduces it. It cleans in a zigzag and detects furniture and walls with its bumper and with proximity sensors.

Its limit is that errors add up. Every wheel slip and every bump throws it slightly off course, and in a large home it can miss some areas or go over others twice. Nor does it keep a permanent map: you can’t send it to a particular room or set no-go zones. In return, it is the cheapest system and, with no turret, the one that fits best under furniture. You can see the robots with a gyroscope.

Camera (vSLAM): a map made of landmarks

vSLAM stands for visual simultaneous localisation and mapping. The robot carries a camera, usually pointed towards the ceiling and the walls, and looks for landmarks: door frames, lamps, corners. By tracking them as it moves, it works out its position and gradually builds a map.

It works well in good light and loses accuracy in dim light or in the dark. Bear that in mind if you plan to schedule it at night. The map is usually less exact than a laser’s, but it allows orderly cleaning and, depending on the model, room selection. The body is low, because there is no turret. You can see the robots with a camera.

Laser: the most precise map

A laser sensor spins inside a small turret on top of the robot and measures the distance to everything around it several times a second. With those measurements it draws a floor plan of your home, normally during the first clean. Because it emits its own light, it works just as well in the dark.

That map makes the most useful everyday features possible:

  • Cleaning a single room or area.
  • Setting no-go zones and virtual walls.
  • Saving one map per floor.
  • Planning the route and shortening the runs.

It has two drawbacks. The turret adds height, and the robot may not fit under a low sofa. And floor-length mirrors and large glass doors can confuse the laser and distort the map; setting a no-go zone there usually fixes it.

LDS, LiDAR and dToF: three acronyms, one family

You will see all three on spec sheets, and they look like different technologies. They are not that different.

  • LiDAR is the general name: measuring distances with laser light.
  • LDS (laser distance sensor) is what many manufacturers call the spinning sensor. It usually calculates distance by triangulation.
  • dToF (direct time of flight) measures how long the light pulse takes to go out and come back. According to manufacturers, it gains range and accuracy.

When you are choosing, all three mean the same thing: laser navigation with a map. The differences are a matter of degree. In the catalogue they sit together under the robots with laser navigation filter.

Gyroscope, camera and laser, side by side

Feature Gyroscope Camera (vSLAM) Laser (LiDAR)
How it finds its way Measures its own turns and wheel travel Tracks visual landmarks Measures distances with a spinning laser
Saved map No Yes Yes, the most precise
In the dark Works Loses accuracy Works just the same
Rooms and no-go zones No Depends on the model Yes
Several floors Cleans, but without maps Depends on the model On most models, one map per floor
Height of the robot The lowest Low Taller, because of the turret
Price The lowest Mid-range From budget to high-end
Suits Small, simple flats Bright homes with low furniture Homes with several rooms

Obstacle avoidance is a separate system

Navigation knows where the walls and the furniture are. It doesn’t see a cable, a sock or the cat’s bowl: the laser turret measures at its own height, above those objects. That job belongs to a second system on the front of the robot. It can be a line laser, structured light (a projected pattern of light that reveals the shape of things) or a camera that recognises objects.

A robot can have laser navigation and no front obstacle avoidance. In that case it detects objects by touching them with its bumper, and it can get tangled in a cable. If there are toys, loose cables or pets at home, look for obstacle avoidance on the product page as a separate feature. Even with it, it is worth picking up cables before a clean.

Which one suits you

  • A studio or a small, open-plan flat on a tight budget: gyroscope.
  • A bright home with very low furniture: camera, if you want a map without the height of a turret.
  • Several rooms, corridors, more than one floor or cleaning at night: laser. It is the most convenient option for most homes.

Tip: get ready for the first clean

On a robot with a map, the first run draws the floor plan of your home. Open all the doors and pick up cables and loose objects. If it navigates by camera, do it in daylight or with the lights on. Afterwards, try not to move the base: the robot uses it as its starting point.

And in the garden, RTK

Outdoors the rules change: there are no walls or ceiling to use as a reference. Wire-free robot lawn mowers find their way with corrected satellite positioning (RTK) and cameras. We explain it in the guide Wire-free robot lawn mowers.

Frequently asked questions

Does a robot with laser navigation vacuum better?

It doesn’t suck any harder: that depends on the motor and the brush. What improves is coverage. It misses fewer areas, takes less time and you can send it exactly where it is needed.

Does it need Wi-Fi to find its way?

No. The robot navigates with its own sensors and you can normally start it with its button. Wi-Fi and the app are needed to see the map, choose rooms, set no-go zones and schedule cleans.

What happens if I move the furniture?

A robot with a map updates it on every clean: a chair that has moved is no problem. If you have building work done or move the base to another room, you usually need to create the map again.

Does a robot with a camera record my home?

It depends on the model. The navigation camera is there to find landmarks, but each manufacturer handles images in its own way and some let you view the camera from your phone. If that worries you, read the app’s privacy policy or choose a robot without a camera.

Next step

Navigation is only one of the decisions: carry on with how to choose a robot vacuum or with which station you need. In the catalogue you can filter by laser, camera or gyroscope, or see all the robot vacuums.

Compare robots

Select up to 4 models in the catalogue. Your selection is saved in this browser.

Choose models →

Wishlist

Saved in this browser. Not synced across devices.

Your wishlist is empty. Tap the heart on a product to save it.